Refrigerator Repair or Fridge Repair

Refrigerator Repair: What To Do If Your Fridge Won’t Turn On

If your refrigerator is not coming on, the best thing to do is to hire a reputable appliance repair service to do a refrigerator repair. A significant percentage of homeowners in Toronto use fridges for various preservation and cooling purposes. No one buys a fridge with the intention of having to fix it. However, the simple truth is that your fridge will eventually break down.

There are a number of reasons why your refrigerator may need appliance repair services. One popular fridge repair issue that you may have to contend with is your device not coming on. If your fridge isn’t coming on, you definitely need to get it fixed as soon as possible.

The best solution is to call in a professional appliance repair service to take a look at your refrigerator. Alternatively, there are DIY tips that you can employ to fix a fridge that is not coming up. Keep reading to find out what to do when your fridge stops coming on.

Reasons Your Refrigerator Is Not Coming On 

Refrigerator repair for a faulty fridge starts by figuring out the cause of the issue. There are many reasons why your fridge may not be coming on. In this section, we will highlight the most common ones to help you focus your troubleshooting efforts.

Issues with your overload relay or starting capacitor

If your refrigerator is not coming on, it may be as a result of your overload relay or starting capacitor failing to start appropriately. The overload relay serves as a medium through which the power which enters the compressor passes through the overload device. 

If your fridge is not coming on but you can hear a consistent clicking sound, it may be as a result of issues with the overload relay and starting capacitor. These faults may be a result of arcing or overheating. The compressor tends to suffer this when it is subject to heavy use without proper maintenance efforts.

Issues with the cold and temperature control system 

The power supplied to the fridge’s compressors and fan circuit is controlled by a switch called the cold control. This switch readily supplies power to your compressors and keeps them active. If the cold control is defective, you may have a situation where the fans and compressors are not working. 

Electronic control board faults

The electronic control board is a major component of your fridge. It controls the temperature of your fridge and also serves as the control station for your compressor. 

A defective electronic board may be a big deal which preferably should be handled by an expert technician. This is because its repair options are complex and require a certain level of technical expertise that can only be provided by experts.

Refrigerator Repair Tips For When Your Fridge is Not Turning On

Sometimes, the refrigerator repair needs for a fridge that is not coming in may be simple. This means that with a few troubleshooting steps, you may be able to get your fridge working again. Follow these steps if your fridge is not coming on as it should.

Check your overload relay and your start-up capacitor

Typically, the relay and overload are housed together, especially if you make use of a recent model. It is usually located by the compressor’s side just behind the rear access panel. 

You can use a multimeter to check the overload relay. A multimeter is an instrument that helps you measure voltage and current and helps you determine where a problem lies. Since your compressor will not start working without your start-up capacitor, you should check your start-up capacitor for arcing and overheating. 

Check your cold and temperature control

Your fridge will not turn on if it’s fans are not on. This can be as a result of a defective temperature switch that is not sending power supply to these fans. You can test for this fault at the knob used to turn the switch on and off, which is found in the control panel. 

Unplug the fridge, remove the temperature control from its housing and pull out the terminal leads. Then, use a multimeter to check for continuity while turning the knob to a colder setting. While doing this, the switch should close. If it doesn’t, that means you have to replace the temperature control. While doing this, make sure to buy a replacement temperature control that is of the right model.

Replace the electronic board

The electronic board of most refrigerators today are complex and hard to understand. As such, home repair may be impossible without requisite technical experience.

If other components in your fridge are working normally, then it is possible that the electronic board is the faulty component. IF you sense that the problem may be the electronic board, you should consult the services of a professional for the best repair results

Final Thoughts

There are many reasons why you may need appliance repair for a fridge that is not coming on. If your fridge is exhibiting this fault, inspect the overload relay and start-up capacitor. Alternately, this fault may be caused by a defective cold control system. The tips we have described above can help you attempt a DIY repair on a fridge that is not coming on.

On the other hand, a better option may be for you to hire a professional fridge repair technician. They will be able to assess the faults and repair it the same day. Do you need appliance repair in Toronto? Our expert fridge repair professionals have the skills to repair your fridge without any issues. Contact us today!

Related article: Cost of Appliance Repair in Toronto